Run the following command to get a list of disks on the system:
wmic diskdrive list brief'
To apply the image to the disk run:
DISM /Apply-Image /ImageFile:.\flash.ffu
Where .\flash.ffu is the FFU in the current directory and PhysicalDrive0 is the drive you identified in via wmic. Be careful, you can reimage your USB boot media using this method without warning.
I recently had a fun time diagnosing a weird deployment error in the following environment: ASP.NET Core 2.0 site hosted on AWS EBS VS 2...
I have a lot of tiny Windows and Linux device spread about my lab/offices. I acknowledge my problem with buying a Raspberry Pi every time...
Windows 10 IoT Core images can be built to include a recovery partition . This can be useful for restoring the device to a working state w...